|Welding Wheel Amplitude:||18-28μm||Generator:||Digital|
800w Ultrasonic Rotary Horn,
Radial Acoustic Welding Ultrasonic Rotary Horn,
Rotary Horn Ultrasonic Welding Tool
35Khz 800w Continuous Working Ultrasonic Rotary Horn For Radial Acoustic Welding
35Khz Ultrasonic Rotary Horn for Radial Acoustic Welding
|Speed||20m/min in max|
|Welding width||10mm in max|
|Welding horn||35Khz rotary horn|
|Welding type||Continues welding|
Ultrasonic seamless stitching can sew most thermoplastic fabrics. Compared with ordinary needle stitching, ultrasonic stitching does not require needle thread, has high stitching strength, good sealing, and fast stitching speed.
When the ultrasonic welding equipment acts on the surface of the thermoplastic plastic, it will generate tens of thousands of high-frequency vibrations per second. The ultrasonic energy is transmitted to the welding area through the weldment, which will generate local high temperature. Due to the poor thermal conductivity of plastics, heat is concentrated in the welding area, causing the surface of the plastic to melt rapidly, and after a certain pressure is applied, it is integrated.
A traditional sewing machine uses a needle to drive the thread to sew two pieces of cloth together. During the needle threading process, not only the cloth is pierced, but there is no bond between the cloth and the cloth, but a thin thread is used to tie them together. In this way, the cloth is easy to be pulled and the thread is easy to break. Thermoplastic fabrics can be stitched together by hot air welding. Needle and thread are not needed, but the welding temperature is not easy to control and the welding speed is slow.
The core technology of the ultrasonic seamless welding system lies in the use of a disc-shaped welding head for seam welding, which ingeniously converts the longitudinal vibration of the transducer into a radial vibration that radiates 360° outwards along the diameter of the disc-shaped welding head. And different from the traditional lace machine, the traditional lace machine is generally composed of a flat tool head and patterned rollers. Because the tool head is stationary, it is easy to cause deformation and wrinkling of fabrics such as fabrics during work. The seamless sewing machine uses two discs to vibrate to sew the fabric, which solves this problem well. This not only greatly reduces the volume of the vibration system itself, but also reduces the installation size, the whole machine is beautiful, the volume is reduced, and the weight is greatly reduced.
Ultrasonic seamless suture system can sew most thermoplastic fabrics. Compared with ordinary needle suture, ultrasonic suture does not require needle thread, has the characteristics of high suture strength, good airtightness, and fast sewing speed. In addition, the ultrasonic seamless stitching system completely solves the problem that the direction of motion of the ultrasonic welding head is different from that of the cloth, and is not synchronized. To a large extent, it replaces ordinary sewing machines.
1. Technical industry: filter bags, health products, medical mattresses and pillows, needle blankets, surgical sheets, foils, bulletproof vests, blinds and awnings, pleated filters, shower curtains, spacer fabrics, seat covers, MBR modules and many more.
2. Clothing industry: outdoor clothing, underwear, medical clothing and curtains, soft shells, sportswear, clean room clothing, etc.
3. Automobile industry: car interior and thermal insulation projects, protective car covers, awnings, etc.
Contact Person: Fiona