|Name:||Ultrasonic Soldering Iron||Temperature Range:||100~400°C|
|Frequency:||60khz||Iron Handle Length & Diameter:||190mm / Ø20|
|Avail Soldering Matrial:||ITO Glass, AL, Mo, Cu Etc.,|
diy ultrasonic welder,
continuous ultrasonic welding
|Maximum Output||100 Watt|
|Temperature Range||150 ~ 400 °C|
|Power Supply||220V / 50-60 Hz|
|Ultrasonic Generator||Size||250(W) x 310(L) x 135(H) mm|
|Feature||Ultrasonic Amplitude Adjustable|
|Iron Handle Length & Diameter||190mm / Ø20|
|Avail Soldering Matrial||ITO Glass, AL, Mo, Cu etc.,|
Small scale production.
For use in laboratory conditions, while preparing data before mass production and for inspection purposes.
Soldering electrodes for display goods.
Soldering electrodes for solar cells.
Soldering electrodes on highly conductive
ceramic substrates.Bonding electronic parts.
Temperature can be set within 200°C 500°C by 10°C unit
This is a soldering technique in which the iron is subjected to ultrasonic vibrations which cavitate the surface of the materials to be soldered and remove any oxides which would impede the adhesion of the solder. In this way normally unsolderable materials such as stainless steel, aluminium, ceramic, or glass can be soldered without the need for flux or other specialist chemicals.
This iron takes the element and tip from a conventional mains-powered soldering iron and mounts it on the transducer from an ultrasonic cleaner. The transducer must be given an appropriate load which in the case of the cleaner is furnished by a water bath, or it will overheat and burn out. soldering iron element, so to prevent transducer meltdown he keeps the element powered continuously but the transducer on a momentary-action switch to ensure it only runs for the short time he’s soldering. There is a temperature damping between the tool head and the transducer, and the high temperature of the tool head will not be transmitted to the transducer, so the service life of the device can be guaranteed. At present, the highest temperature of the equipment can withstand 400 degrees of continuous work, so it can only be soldered. The melting point of metallic tin is relatively low. We are also working to develop more materials for welding.
It can solder to the glass, ceramic, or metal that cannot soldering
Light weight and good portability
Various derivatives are available
According to the customer’s order, the end of the tip in the handle can produce
It is for electrode part, solar battery parts, and electrode of superconductivity ceramic parts
Contact Person: admin