ultrasonic assembly horns,
ultrasonic cutting horn
The welding of Bumper elements mostly done with ultrasonic in the form of staking, spot welding. In some case heat sealing or Hot air Sealing is also applicable. Another special application is Ultrasonic cutting to make a clean and sharp openings on P.P. Bumpers. In case of burrs (residues of injection runner) appeared, It is also required to cut and trim with ultrasonic ( Knife ) accordingly.
In case of reinforcement required ( at the back side of Bumper), A hot plate welding system or vibration welding system shall be applied.
Every part of the car requires ultrasonic welding. RPS-SONIC can provide you with the corresponding electric box and transducer (transducer, horn & tool head). Provide reasonable suggestions based on your installation space and welding application, including the size of the tool head, the power model of the electrical box & transducer We have professional transducer & tool head production and design capabilities. Can provide you with suitable ultrasonic electric vibration system according to different application conditions
Ultrasonic welding is a fast, strong, clean, and reliable plastic and metal joining process. For thermoplastic films and boards, most metals can be ultrasonically welded. Applicable plastic
Ultrasonic plastic welding can be used on all thermoplastics. Care must be taken when slitting parts made of partially crystalline plastic, the welding used for this plastic type
The method is very different from the welding method of amorphous plastic.
PS, ABS, Acrylic, ABS, SAN, PMMA, PC-ABS Blends, Polycarbonate / PC, PC-ABS Blends, PPS,
Polysulfone / PSO, PVC, ASA, PPO, PC-PBT Blends, Polyester, Ryton, PET, Polyamide Co-polymer (Nylon6-3-TD), Valox Polyamide / Nylon 6, Polyamide / Nylon6 / 6, PBT, PP, PE , Polyacetal, Ultem (PEI)
Contact Person: admin