|Weight:||6kg||Generator:||Digital,can Conect PLC|
Auto Tracking Type Ultrasonic Cutting System,
30Khz Ultrasonic Cutting System,
500w Ultrasonic Cutting Device
30Khz 500w Robot Arm Ultrasonic Cutting System For Fabric Cashmere Cutting With RS485
30Khz Robot arm Ultrasonic cutting system for fabric Cashmere cutting
|Frequency adjustment||Auto-tracking type|
|Max. power output||500W|
|Power output||Infinitive adjustment|
|Power supply||AC200V 50/60Hz|
|Outer dimension (mm)||120*120*380|
Different fabric cutting processes
The cutting process of fabrics is generally divided into two types: cold cutting and hot cutting. Both of these cutting methods have certain limitations.
Ultrasonic fabric cutting is compared with cold cutting. When using ultrasonic fabric cutting, after the thermoplastic material is cut, the edges of the cut will be fused; compared with thermal cutting, using ultrasonic cutting can make the edges of the cut fabric very soft , To avoid excessive thickening of edges due to melt shrinkage. Since the ultrasonic is heated from the inside of the fabric, there will be no yellowing of the fabric.
The basic structure of the sonic cutting machine. Ultrasonic transducer, ultrasonic horn, ultrasonic cutting knife, ultrasonic generator.
The mains electricity is converted into high frequency and high voltage alternating current, which is output to the ultrasonic transducer. Ultrasonic transducer is equivalent to energy conversion device, it can convert the input electric energy into mechanical energy, namely ultrasonic wave. The ultrasonic transducer stretches back and forth in the longitudinal direction, and the frequency of the stretch movement is equal to the frequency of the high-frequency alternating current supplied by the driving power source.
The ultrasonic horn amplifies the output amplitude of the ultrasonic transducer.
Amplify the amplitude further and focus the ultrasound.
Ultrasonic waves are output, and the cutting knife is used to concentrate the ultrasonic energy into the cutting part of the material to be cut. Under the action of huge ultrasonic energy, this part instantly softens and melts, and its strength is greatly reduced. Only a small amount of force is required to achieve the purpose of cutting materials.
Ultrasonic cutting machine features, does not need sharp blades, does not require a lot of pressure, and will not chip or damage the cutting material.
1. The cutting knife is doing ultrasonic vibration, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. It has obvious cutting effect on frozen, viscous and elastic materials. It is especially effective for cutting food, rubber or objects that are inconvenient to apply pressure.
2. At the same time of cutting, the cutting part has fusion. Sealing the cutting part can prevent the loosening of the cut material (such as the flash of textile materials). The use of the ultrasonic cutting machine can also be expanded, such as digging holes, shoveling, scraping paint, carving, slitting and so on.
This equipment uses the high-speed micro-vibration of 20,000 to 30,000 times per second of the blade to reduce the friction between materials and the difficult-to-cut synthetic resin products, rubber products, non-woven fabrics, film, composite products and other industrial collars. Damage caused by the city’s products,
It can be used for manual work or installed on automated equipment.
Contact Person: Fiona