Place of Origin:
20khz Branson transducer for Branson 2000 / 2000X actuator and IW systems.
The basic structure of an ultrasonic transducer consists of a piezoelectric material, typically a ceramic or a polymer, sandwiched between two electrodes. When an alternating current is applied to the electrodes, the piezoelectric material undergoes mechanical vibrations due to the piezoelectric effect. These vibrations generate ultrasonic waves with frequencies typically above 20 kHz, which is beyond the range of human hearing.
In the transmit mode, the ultrasonic transducer acts as a sender by converting electrical energy into ultrasonic waves. The alternating current causes the piezoelectric material to vibrate, and these vibrations are transferred to the surrounding medium as sound waves. The frequency of the generated ultrasonic waves is determined by the input electrical signal.
In the receive mode, the ultrasonic transducer acts as a receiver by converting incoming ultrasonic waves into electrical signals. When the ultrasonic waves encounter an object or a medium, they reflect or scatter back towards the transducer. The piezoelectric material, still acting as a transducer, converts these mechanical vibrations caused by the returning ultrasonic waves into electrical signals. These electrical signals can then be processed and analyzed for various purposes, such as imaging or measurement.
But we have to declaratie in advance, this Branson CJ20 is made by RPS-SONIC, replacement transducer for Branson CJ 20, not original Branson CJ20. Please not mixed it with the original Branson.
Ultrasonic welding converter is a key part in ultrasonic welding system, which will convert electrical energy into mechanical energy, so that two plastic parts can vibrate in high frequency and melt on the surface, which will be welded after applying some press force on both parts. RINCO ULTRASONICS is a leading company in the field of ultrasonic welding and cutting technology. From the smallest component to the overall system, we develop individual solutions for customers from all industrial sectors. RINCO products are 100% manufactured in Switzerland and meet the highest quality standards.We have the oringinal rinco welder and transducer, so that our transducer can be same as the original design, both in aluminum or in Titanium. Rinco Ultrasonic 20 kHz Converter with open housing& closed housing. Rinco Converter 35kHz Transducer with open housing& closed housingWe will make all transducer work in oringnal Rinco machine 24 hours to confirm it can work on the rinco machine no problem, so that there will be no matching problem.
1. The piezoelectric ceramic chip adopts imported parts, and can give a strong and stable output.
2. High efficiency, high mechanical quality factor, obtaining high electric-acoustic conversion efficiency work at the resonance frequency points.
3. Large amplitude: optimization design by computer , vibration speed ratio is high .
4. Large power,Under the action of prestressed screw, the energy of the piezoelectric ceramic to get maximum play;
5. Good heat resistance, small harmonic impedance, low calorific value, using temperature range is wide.
Why RPS-SONIC TRANSDUCER:
1. Every transducer with a only tracking number, you can check the parameter from our saler no matter how long it passed.
2. All transducer with one year warranty.
3. Specialized in ultrasound for more than ten years
4. Every transducer with 24hours old testing before shipment.
5. Good packing, no packing problem during the 10 years exporting business.
6. Every customer will get purchase records and there are certain rewards after accumulation
Service and shipment
Send your inquiry directly to us