|Generator:||Ultrasonic Digital Generator||Material:||High Speed Steel|
|Blade Thickness:||1mm||Amplitude Of Cutter Head:||10-60μm|
|Cutting Thickness:||0.1~10mm||Shell Material:||Stainless Steel, Aluminum|
Plastic Ultrasonic Cutting Blade,
Blanket Ultrasonic Cutting Blade,
Robot Arm Ultrasonic Cutting Blade
Ultrasonic cutting knives use the principle of generating heat energy instantly by ultrasonic vibration and friction.
The mold or cutter contacts the ultrasonic vibration surface under the pressure of the cylinder to achieve the cutting effect; adopts PLC
The console, automatic feeding, electric eye tracking and scanning, and the use of sensors to track the cutting position of the trademark,
And equipped with anti-static device, can remove a large amount of static electricity generated when cutting off.
A brand-new clamping structure is adopted, so that the blade can be replaced, which greatly reduces the cost of use.
This product has now entered the stage of small batch trial production, and has been recognized and praised by trial users.
This product is mainly used in the cutting of plastic parts, rubber cutting, trimming of injection molding materials, and cutting of shoe sole materials.
The replacement blade ultrasonic cutting shell is made of stainless steel, which can be used to cut thermoplastic resin plates, sheets, films and laminates, carbon fiber composite materials, polyethylene fibers, carbon or glass fiber (GFRP) molded products, rubber, and vulcanized latex , Non-vulcanized latex.
Advantages of ultrasonic cutting
High stability: When the ultrasonic generator is working, it generates 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the cutting knife and the material to be cut. The slitting is performed mechanically, so there is no need for sharp cutting edges, the blade wear is small, and at the same time The cutter head can be replaced by yourself.
No pollution: When the ultrasonic knife is cutting, the temperature of the knife head is lower than 50 ℃, so smoke and odor will not be generated, which eliminates the danger of injury and fire during cutting.
Neat cutting: Since the ultrasonic is cut by high-frequency vibration, the material will not adhere to the surface of the blade, and only a small amount of pressure is required during cutting. It will not deform and wear for fragile and soft materials. The fabric will be automatically sealed at the same time. Will cause edge collapse.
The operation is simple: the cutting knife is connected to the ultrasonic generator, the generator is connected to the 220V mains, and the switch can be turned on to cut. It supports hand-held cutting and is equipped with an air-cooled interface.
Wide range of applications: all kinds of textile materials and plastic sheets can be ultrasonically cut, such as natural fibers, synthetic fibers, non-woven fabrics and knitted fabrics can be ultrasonically cut.
|Frequency adjustment||Auto-tracking type|
|Max. power output||500W|
|Power output||Infinitive adjustment|
|Power supply||AC200V 50/60Hz|
|Outer dimension (mm)||120*120*380|
Contact Person: Fiona